| Generator Model | GJY80-NG | |
| Gas Source | Natural Gas | |
| Standby kVA | 110 | |
| Prime kVA | 100 | |
| Standby kW | 88 | |
| Prime kW | 80 | |
| RPM | (r/min) | 1500 |
| Voltage Options | V | 400 |
| Frequency | 50 | |
| Power Factor | 0.8 | |
| Electrical Efficiency | % | ≥38 |
| Thermal Efficiency | % | ≥48.4 |
| Total Efficiency | % | ≥86.4 |
| Gas Consumption | m³/h | 23.1 |
| Heat balance parameters | ||
| Cylinder Liner Cooling Water Heat (±8%) | kW | 65 |
| Oil Cooler Cooling Water Heat (±8%) | kW | 14 |
| High Temperature Cooling System Total Cooling Water Heat (±8%) | kW | 79 |
| Intercooler Cooling Water Heat (±8%) | kW | 18 |
| Low Temperature Cooling System Total Cooling Water Heat (±8%) | kW | 18 |
| Exhaust Gas Waste Heat (exhaust gas temperature up to 120°C) (±8%) | kW | 56 |
| Total Radiant Heat (±8%) | kW | 10 |
| Cooling parameters | ||
| High Temperature Circulation Water Flow Rate | m³/h | 3 |
| High Temperature Circulation Water Inlet Temperature (±2%) | °C | 81.7 |
| High Temperature Circulation Water Outlet Temperature (±2%) | °C | 88 |
| Low Temperature Inlet Water Temperature (±2%) | °C | 50 |
| Low Temperature Outlet Water Temperature (±2%) | °C | 52.2 |
| Intake and exhaust parameters | ||
| Air Intake | kg/h | 477.3 |
| Gas Intake | kg/h | 18.4 |
| Air Displacement | kg/h | 495.7 |
| Post-Turbocharger Exhaust Temperature (±5%) | °C | 510 |
| Test Conditions | ||
| Calorific value of gas | kWh/m | 9.1 |
| Methane volume content | % | ≥96 |
| Gas temperature | °C | -10~40°C |
| Gas Inlet Pressure (Before Regulator) | kPa | 800～1000 |
| Gas Inlet Pressure (After Regulator) | kPa | 400～600 |
| Air intake negative pressure | kPa | >-3 |
| Exhaust back pressure | kPa | <5 |
| Absolute atmospheric pressure | kPa | 101.32 |
| Ambient temperature | °C | 25 |
| Relative humidity | % | 30 |
| Altitude | m | ≤1,000 |
