| Generator Model | GJY1000-NG | |
| Gas Source | Natural Gas | |
| Standby kVA | 1375 | |
| Prime kVA | 1250 | |
| Standby kW | 1100 | |
| Prime kW | 1000 | |
| Rpm | (r/min) | 1000 |
| Voltage Options | V | 400 – 3300 – 6000 – 6300 – 6600 – 10000 – 10500 – 11000 |
| Frequency | 50 | |
| Power Factor | 0.8 | |
| Electrical Efficiency | % | ≥40 |
| Thermal Efficiency | % | ≥51.3 |
| Total Efficiency | % | ≥91.3 |
| Gas Consumption | m³/h | 257.7 |
| Heat balance parameters | ||
| Cylinder Liner Cooling Water Heat (±%8) | kW | 328 |
| Oil Cooler Cooling Water Heat (±%8) | kW | 197 |
| Total Cooling Water Heat of High Temperature Cooling System (± %8) | kW | 664 |
| Intercooler Cooling Water Heat (±%8) | kW | 139 |
| Total Cooling Water Heat of Low Temperature Cooling System (± 8) | kW | 102 |
| Exhaust Gas Waste Heat (Exhaust Gas Temperature Up to 120°C) (±%8) | kW | 621 |
| Total Radiant Heat (±%8) | kW | 84 |
| Cooling parameters | ||
| Flow Rate of High Temperature Circulation Water | m³/h | 60 |
| Inlet Temperature of High Temperature Circulation Water (± %2) | °C | 75.1 |
| Outlet temperature of high temperature circulating water (±2%) | °C | 86 |
| Low temperature inlet water temperature (±2%) | °C | 40 |
| Low Temperature Outlet Water Temperature (±%2) | °C | 41.7 |
| Intake and exhaust parameters | ||
| Air Intake | kg/h | 5304.2 |
| Gas Intake | kg/h | 202.5 |
| Air Displacement | kg/h | 5506.7 |
| Post-Turbocharger Exhaust Temperature (±%5) | °C | 485 |
| Test Conditions | ||
| Calorific value of gas | kWh/m | 9.7 |
| Methane volume content | % | ≥96 |
| Gas temperature | °C | -10~40°C |
| Gas inlet pressure (Before regulator) | kPa | 30~50 |
| Gas inlet pressure (After regulator) | kPa | 8~15 |
| Air intake negative pressure | kPa | >-3 |
| Exhaust back pressure | kPa | <5 |
| Absolute atmospheric pressure | kPa | 101.32 |
| Ambient temperature | °C | 25 |
| Relative humidity | % | 30 |
| Altitude | m | ≤1,000 |
